Video Quick Setup
Objective: Configure the X100VI for simple video clips without turning the camera into a complicated cinema rig.
Recommended Equipment
- Fast SD card
- Spare battery
- Optional small microphone if supported
Quick Setup Summary
| Setting | Recommended Value |
|---|---|
| Mode | Movie |
| Resolution | 4K for general use |
| Frame Rate | 24/30 fps general; 60 fps action |
| Focus | Continuous AF if subject moves |
| Stabilization | On |
| Audio | Check levels |
Step-by-Step Menu Setup
Follow these steps in order. Each step explains the menu path and the reason for the choice.
Step 1 – Switch to movie mode
Why: Movie settings are separate from still shooting settings.
Recommended: Use movie mode when recording clips.
Avoid: Avoid assuming still settings always transfer perfectly.
Step 2 – Choose resolution
Why: 4K is a good general-quality setting.
Recommended: Use 4K 24/30 for normal clips; higher frame rate for motion.
Avoid: Avoid maximum settings if storage/battery are limited.
Step 3 – Set focus
Why: Moving video subjects need continuous focus.
Recommended: Use AF-C for movement, manual for controlled scenes.
Avoid: Avoid AF hunting during important clips.
Step 4 – Check audio
Why: Bad audio can ruin video.
Recommended: Check levels before recording.
Avoid: Avoid covering microphones.
Professional Tips
- Record a 10-second test clip.
- Watch battery heat/storage.
- Use a small tripod for interviews.
Troubleshooting
| Problem | Likely Cause / Fix |
|---|---|
| Focus hunts | Use manual focus or simpler AF area. |
| Audio poor | Check levels and wind. |
| Files large | Lower resolution/frame rate if needed. |
Final Checklist
- Mode: Movie
- Resolution: 4K for general use
- Frame Rate: 24/30 fps general; 60 fps action
- Focus: Continuous AF if subject moves
- Stabilization: On
- Audio: Check levels
Camera Ready: After these settings are confirmed, the X100VI is ready for this type of photography.