Indoor and Family Photography
Objective: Configure the X100VI for home, family, and indoor events where light is low and people move.
Recommended Equipment
- Spare battery
- Formatted card
- Optional built-in flash
- Optional small external flash
Quick Setup Summary
| Setting | Recommended Value |
|---|---|
| Image Quality | FINE+RAW |
| Film Simulation | Reala Ace or Astia |
| Aperture | f/2–f/4 |
| ISO | Auto ISO 125–6400 |
| AF Mode | Zone or Single Point |
| Face/Eye | On |
| White Balance | Auto |
Step-by-Step Menu Setup
Follow these steps in order. Each step explains the menu path and the reason for the choice.
Step 1 – Set Auto ISO high enough
Why: Indoor blur is usually worse than moderate ISO noise.
Recommended: Allow ISO 6400 indoors if needed.
Avoid: Avoid ISO 125 fixed indoors.
Step 2 – Open aperture
Why: More light helps keep shutter speed practical.
Recommended: Use f/2 for one person, f/4 for small groups.
Avoid: Avoid f/2 for group photos.
Step 3 – Enable Face/Eye
Why: Family photos usually need faces sharp.
Recommended: Use Face/Eye On.
Avoid: Turn off for objects or table details.
Step 4 – Use Auto WB
Why: Home light changes and mixes frequently.
Recommended: Use Auto WB, correct RAW later if needed.
Avoid: Avoid mixed light if color matters.
Professional Tips
- Take multiple frames to avoid blinking.
- Use window light when possible.
- Use fill flash gently.
Troubleshooting
| Problem | Likely Cause / Fix |
|---|---|
| Motion blur | ISO limit too low or shutter too slow. |
| Only one person sharp | Aperture too wide. |
| Orange color | Warm indoor bulbs; adjust WB. |
Final Checklist
- Image Quality: FINE+RAW
- Film Simulation: Reala Ace or Astia
- Aperture: f/2–f/4
- ISO: Auto ISO 125–6400
- AF Mode: Zone or Single Point
- Face/Eye: On
- White Balance: Auto
Camera Ready: After these settings are confirmed, the X100VI is ready for this type of photography.